Blog
Plinth Paint: How to Paint the Base of Your House So It Stays Clean
Short answer: Plinth paint is a coating for the base of your house, the band from ground level up to the floor level. This…
Read article
Blog
Why Does Exterior Paint Fade So Quickly in Kerala? 7 Causes and Fixes
Short answer: Exterior paint fades quickly in Kerala because strong year-round sunshine (UV) breaks down the pigments and binder, while heavy monsoon rain, humidity…
Read article
Blog
Blue Wall Paint: 12 Best Shades and Where Each Blue Works Best
Short answer: The best blue wall paint depends on the room and the light. Pale blues with an LRV of 75 to 80, such…
Read article
Blog
How Long Does Epoxy Primer Take to Dry? Dry, Recoat and Cure Times
Short answer: Drying time depends on the primer. Prestige Epoxy Primer is surface dry in about 4 minutes, can be recoated after 6 hours…
Read article
Blog
Why Does Paint Lose Its Shine? 8 Causes and How to Restore It
Short answer: Paint loses its shine mainly because sunlight (UV) breaks down the binder at the surface of the film, leaving it rough and…
Read article
Blog
Cream Wall Paint: 12 Best Shades and Where Cream Works Best
Short answer: Cream wall paint works best in rooms that need warmth without losing brightness: living rooms, bedrooms, dining areas and north-facing rooms with…
Read article
Blog
Prestige Epoxy Primer for Industrial Projects: A Guide for Factories and Warehouses
Short answer: On industrial projects, specify Prestige Epoxy Primer for structural steel, pre-engineered building frames, mezzanines, staircases, pipe racks, tank stands and concrete floors…
Read article
Blog
Prestige Epoxy Primer for Machinery, Tanks and Pipelines: A Maintenance Guide
Short answer: Prestige Epoxy Primer protects the external steel surfaces of machinery, storage tanks, pipelines, pipe racks and equipment frames. Its low-permeability epoxy film…
Read article
Blog
Prestige Epoxy Primer for Fabricators: Faster Handling, Fewer Touch-Ups
Short answer: Fabricators and welding shops use Prestige Epoxy Primer because it speeds up the job and protects the steel through handling and transport.…
Read article