3mm Fibre Technology · Elastomeric
Damp Shield
Not just paint — armor for your walls.
A reinforced elastomeric waterproof coating for exterior surfaces. Long-lasting fibre technology makes Damp Shield a chemically active waterproofing treatment that penetrates deep into concrete capillaries.
Feature 01 · The core technology
3mm fibre technology.
Damp Shield is a reinforced coating, not simply a thick one. Fibres run right through the film, so the cured membrane behaves as one continuous sheet instead of a brittle layer sitting on the slab.
That matters because a roof never stays still. Concrete expands in the sun and contracts in the rain, and an unreinforced coating splits at whatever point is weakest. The fibres carry that movement across the gap, which is what lets Damp Shield bridge a crack rather than just cover it — and why it keeps working through season after season on terraces, parapets and the wall junctions where damp finds its way in.
Image brief
Prompt. 3mm fibre technology. Show a weathered coastal or hill-station house whose paint finish is still intact, wide environmental view. Context: a terrace, parapet or damp-prone wall junction during or just after monsoon rain. photorealistic editorial product photography, South India / Kerala setting, natural daylight, shallow depth of field, muted natural colour, no text, no logos, no watermarks, no lettering of any kind, no people looking at camera, 3:2 landscape
Feature 02
Waterproofing.
Penetrates deep into concrete capillaries and blocks water.
Image brief
Prompt. Waterproofing. Show water beading and running off the treated surface during heavy rain. Context: a terrace, parapet or damp-prone wall junction during or just after monsoon rain. photorealistic editorial product photography, South India / Kerala setting, natural daylight, shallow depth of field, muted natural colour, no text, no logos, no watermarks, no lettering of any kind, no people looking at camera, 3:2 landscape
Feature 03
Bridges cracks.
Excellent ability to bridge cracks in the substrate.
Image brief
Prompt. Bridges cracks. Show a close macro of a hairline crack in plaster being bridged by the coating. Context: a terrace, parapet or damp-prone wall junction during or just after monsoon rain. photorealistic editorial product photography, South India / Kerala setting, natural daylight, shallow depth of field, muted natural colour, no text, no logos, no watermarks, no lettering of any kind, no people looking at camera, 3:2 landscape
At a glance
Performance at a glance.
Tested under laboratory conditions.
Buying & support
Where to buy it, and who to ask.
Damp Shield is sold through stockists across Kerala. Specification advice comes straight from the people who make it.
02
Technical support
Specification questions and system advice, from the people who make it.
How much Damp Shield will you need?
Damp Shield is specified as a system, not by the coat, and the three systems consume very different amounts — a terrace takes roughly two and a half times what a wall does. Pick the job first; the figures below are the forced system coverages from the application data.
Enter an area to see the litres required.
1 Figures are the forced system coverages from the Damp Shield application data, converted from m²/L. They cover the whole system, not one coat. Real consumption varies with surface texture, porosity and application; a rough or previously cracked terrace will take more. Allow 4–6 hours drying between coats, and finish with two coats of a Turbolux exterior emulsion.
Tech specs.
Full technical properties. Tested under laboratory conditions.
| Product | Damp Shield |
|---|---|
| Category | Waterproofing |
| Finish | Elastomeric |
| Technology | 3mm Fibre Technology |
| Rated for | Roof & terrace, Damp & leaks |
| Pack sizes | 1L · 4L · 10L · 20L |
| Warranty | 7 year warranty |
| Coverage — terrace / roof system | 0.93 m²/L (approx. 10 sq ft/L) |
|---|---|
| Coverage — wall system, fresh | 2.32 m²/L (approx. 25 sq ft/L) |
| Coverage — wall system, repaint | 2.79–3.25 m²/L (approx. 30–35 sq ft/L) |
| Dilution | Self-priming coat 3:1 with water; subsequent coats undiluted |
| Recoat | 4–6 hours between coats |
| Topcoat | 2 coats Turbolux exterior emulsion |
Questions people actually ask.
Straight answers about how this product behaves on site.
What is 3mm fibre technology?
Fibres are distributed through the coating so the cured film acts as one reinforced sheet. When the roof or parapet moves with heat and rain, the fibres carry the stress across the gap instead of letting the film tear, which is what lets Damp Shield bridge cracks rather than only cover them.
What finish is Damp Shield?
Damp Shield is a elastomeric finish waterproofing product.
What pack sizes does Damp Shield come in?
Damp Shield is available in 1L and 4L and 10L and 20L.
What surfaces is Damp Shield for?
Damp Shield is rated for roof & terrace, damp & leaks.
What warranty does Damp Shield carry?
Damp Shield carries a 7 year warranty. Registration and conditions should be confirmed with Turbolux Paints before purchase.
How much Damp Shield will I need?
Your dealer confirms the exact quantity for Damp Shield. Send the wall area and the number of coats and Turbolux will come back with a figure.
What makes Damp Shield different?
Waterproofing. Penetrates deep into concrete capillaries and blocks water.
Compare within waterproofing.
Side by side.
| Damp Shield | Aqua Seal | |
|---|---|---|
| Finish | Elastomeric | Barrier Coat |
| Warranty | 7 year warranty | 10 year performance warranty |
| Pack sizes | 1L · 4L · 10L · 20L | 1L · 4L · 10L · 20L |
| Rated for | Roof & terrace, Damp & leaks | Interior walls, Damp & leaks |