Blog
Barossa Exterior Emulsion: A Smooth GLATT-Technology Finish on a Budget
Short answer: Turbolux Barossa is an affordable, water-based exterior emulsion formulated with GLATT technology for a very smooth, rich finish with a soft sheen…
Read article
Blog
Alpha Titanium + Exterior Emulsion: Luminex Technology and UV-Resistant Whiteness
Short answer: Turbolux Alpha Titanium + is a high-performance, water-based exterior emulsion built around Luminex Technology for brilliant, long-lasting whiteness and colour. It offers…
Read article
Blog
Damp Shield: Elastomeric Roof Waterproofing with 7-Year Fibre Technology
Short answer: Turbolux Damp Shield is a reinforced elastomeric waterproof coating made for roofs and exterior surfaces. Its 3 mm long-lasting fibre technology lets…
Read article
Blog
Aqua Seal: Damp-Proof, Salt-Resistant Wall Coating for Kerala Homes
Short answer: Turbolux Aqua Seal is a water-based, damp-proof and salt-resistant barrier coating powered by Nano-Polymer Technology. Its ultra-fine particles sink into the wall…
Read article
Blog
How Often Should You Repaint Your House in Kerala?
Short answer: In Kerala's climate, most homes need exterior repainting every 4 to 6 years and interior repainting every 5 to 7 years, though…
Read article
Blog
Mirror Black & Mirror Grey: A Guide to High-Gloss Walls
Short answer: Mirror Black and Mirror Grey are premium high-gloss emulsions that give walls a smooth, light-reflecting mirror finish. They are made for feature…
Read article
Blog
Majestic vs Alpha Advanced vs More Life: Which Exterior Emulsion?
Short answer: Choose Majestic if you want the longest life and a premium self-cleaning finish, with a 12-year warranty for a house you plan…
Read article
Blog
How Much Does It Cost to Paint a House in Kerala? (2026)
Short answer: As a working figure for 2026, repainting a home interior in Kerala costs about ₹18 to ₹35 per square foot of wall…
Read article
Blog
Black Spots and Mould Indoors: Causes and Paint Solutions
Short answer: Black spots and mould indoors are caused by damp, not by dirty paint. Moisture from seepage, condensation or poor ventilation feeds mould…
Read article